STC-MCA5MUSB3

Specifications – MCA5MUSB

Model Number: STC-MCA5MUSB3
Image Sensor: 1/2.5″ 5M pixel Color CMOS (Aptina: MT9P031I12STC)
Active Picture Elements: 2592(H) x 1944(V)
Cell Size: 2.2 (H) x 2.2 (V) μm
Scanning System: Progressive
Shutter Type: Rolling Shutter
Scanning Mode: Full Scanning, Variable AOI (Horizontal / Vertical)
Maximum Frame Rate (in Full Scanning Mode): QSXGA: 2592 x 1944: 14fps (Settable from 6.88 to 14fps) *Frame rate will drop if connected with the USB2.0 port. (Raw 8bit output: 7fps, Raw 10/12bit output: 3.5fps)
Sync. System: Internal
Video Output Format: RAW 8bit/10bit/12bit, Mono 8bit/10bit/12bit
S/N Ratio (8bit): ≤ 4 Digit (Gain 0 dB)
Minimum Scene Illumination: 9 Lux at F1.2
ALC: Auto Shutter / Auto Gain
Electronic Shutter:
- Free-run Mode: Exposure Time — 32 μsec to 38sec (in full scanning mode)
- Edge Preset Trigger Mode: Exposure Time — 32 μsec to 38sec (in full scanning mode)
- Pulse-width Trigger Mode: Exposure Time — 32 μsec to unlimited (in full scanning mode)
Gain: Analog 0 to 26.97 dB, Digital 0 to 12.04 dB
Digital Clamp: 0 to 255 (LSB of 12bit output)
Gamma: 0.1 to 4.0 (settable with 0.1 step)
AOI:
- AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines)
- Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction
Binning Function: Horizontal 1/2, 1/4; Vertical 1/2, 1/4 *Only pixels in the horizontal direction can be added to increase the brightness.
Skipping Function:
- Horizontal: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7
- Vertical: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8
Mirror Image: Horizontal / Vertical / Horizontal and Vertical
Pixel Defect Correction: Up to 64 pixels (This function is turned off at shipping.)
White Balance: Auto / Manual / One-shot
Operational Mode: Free-run / Edge-preset Trigger / Pulse-width Trigger / Start and Stop Trigger
Frame Memory: One Frame
Interface: USB3.0 Super speed (USB3.0 Micro B)
Input/Output: Two Inputs and Two Outputs
Power Input Voltage: +5V (typ.) (Conform to USB Standard)
Consumption: Less than 2W